My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Community Poll
The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25C ~ +75C.
The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.
Features
:
3-way isolated noise/surge protection Protects the hardware from damage caused by noise and surges and is designed with isolation circuits for Ethernet, I/O and Power.
All-in-one module The various I/O components are mixed with multiple channels in a single module and proved the most cost effective I/O usage and enhances performance of the I/O operations.
Automatic MDI / MDI-X crossover for plug-and-play: RJ-45 port supports automatic MDI/MDi-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables
Built-in Dual Watchdog The Dual Watchdog consists of a Module Watchdog and a Host Watchdog. The Module Watchdog is a built-in hardware circuit that can be used to monitor the operation of the module and will reset the CPU module if a failure occurs in either the hardware or the software. The host Watchdog is a software function that can be used to monitor the operating status of the host and is used to prevent network communication problems or host failures.
Built-in Multi-function I/O An LED indicator is used for each DI or DO channel. All the Digital Output modules provide a power on value (on boot up, the DO status is set to the power-on value) and safe value (if Modbus/TCP communication is lost for a specified period the DO status is set to the safe value.) All te digital Input modules provide a High/Low latched status and DI channles that can also be used as DI status and 16-bit low speed (100Hz) counters.
Built in Web Server Each ET-6000 module has a built in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser.
Communication Security An account and password are needed when logging into the ET-6000 web server and an IP address filter is included which can be used to allow or deny connections from specific IP addresses.
I/O pair connection: This function is used to create a DI to DO pair through the Ethernet. Once the configuration is complete the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.
Modbus protocol The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI. The Modbus/TCP to the Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability.
Portable Configuration All configuration settings can be saved to the EEPROM on the ET6000.. The EEPROM is mounted on a daughter board (called the "portable" board) and the settings can be stored and easily backed up and moved.
Ventilated housing designed to operate between -25°C and +75°C The ET-6000 is housed in a plastic-based shell /case with a column-like ventilator that helps to cool the working environment inside the shell/case and allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C.
Web HMI The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point . No HTML or Java skills are needed to create the web pages.
Specifications
Related Products
ET-6052D
ET-6052D
ET-6060D
ET-6060D
The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.
Features
:
3-way isolated noise/surge protection Protects the hardware from damage caused by noise and surges and is designed with isolation circuits for Ethernet, I/O and Power.
All-in-one module The various I/O components are mixed with multiple channels in a single module and proved the most cost effective I/O usage and enhances performance of the I/O operations.
Automatic MDI / MDI-X crossover for plug-and-play: RJ-45 port supports automatic MDI/MDi-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables
Built-in Dual Watchdog The Dual Watchdog consists of a Module Watchdog and a Host Watchdog. The Module Watchdog is a built-in hardware circuit that can be used to monitor the operation of the module and will reset the CPU module if a failure occurs in either the hardware or the software. The host Watchdog is a software function that can be used to monitor the operating status of the host and is used to prevent network communication problems or host failures.
Built-in Multi-function I/O An LED indicator is used for each DI or DO channel. All the Digital Output modules provide a power on value (on boot up, the DO status is set to the power-on value) and safe value (if Modbus/TCP communication is lost for a specified period the DO status is set to the safe value.) All te digital Input modules provide a High/Low latched status and DI channles that can also be used as DI status and 16-bit low speed (100Hz) counters.
Built in Web Server Each ET-6000 module has a built in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser.
Communication Security An account and password are needed when logging into the ET-6000 web server and an IP address filter is included which can be used to allow or deny connections from specific IP addresses.
I/O pair connection: This function is used to create a DI to DO pair through the Ethernet. Once the configuration is complete the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.
Modbus protocol The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI. The Modbus/TCP to the Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability.
Portable Configuration All configuration settings can be saved to the EEPROM on the ET6000.. The EEPROM is mounted on a daughter board (called the "portable" board) and the settings can be stored and easily backed up and moved.
Ventilated housing designed to operate between -25°C and +75°C The ET-6000 is housed in a plastic-based shell /case with a column-like ventilator that helps to cool the working environment inside the shell/case and allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C.
Web HMI The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point . No HTML or Java skills are needed to create the web pages.
Specifications
Related Products
ET-6052D
ET-6052D
ET-6060D
ET-6060D
