ET2-6064D

Be the first to review this product

Availability: In stock

$569.00
Add Items to Cart

Quick Overview

24-Channel Relay Output Web Based I/O Module.

ET2-6064D

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25C ~ +75C. The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol. Features : 3-way isolated noise/surge protection Protects the hardware from damage caused by noise and surges and is designed with isolation circuits for Ethernet, I/O and Power. All-in-one module The various I/O components are mixed with multiple channels in a single module and proved the most cost effective I/O usage and enhances performance of the I/O operations. Automatic MDI / MDI-X crossover for plug-and-play: RJ-45 port supports automatic MDI/MDi-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables Built-in Dual Watchdog The Dual Watchdog consists of a Module Watchdog and a Host Watchdog. The Module Watchdog is a built-in hardware circuit that can be used to monitor the operation of the module and will reset the CPU module if a failure occurs in either the hardware or the software. The host Watchdog is a software function that can be used to monitor the operating status of the host and is used to prevent network communication problems or host failures. Built-in Multi-function I/O An LED indicator is used for each DI or DO channel. All the Digital Output modules provide a power on value (on boot up, the DO status is set to the power-on value) and safe value (if Modbus/TCP communication is lost for a specified period the DO status is set to the safe value.) All te digital Input modules provide a High/Low latched status and DI channles that can also be used as DI status and 16-bit low speed (100Hz) counters. Built in Web Server Each ET-6000 module has a built in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser. Communication Security An account and password are needed when logging into the ET-6000 web server and an IP address filter is included which can be used to allow or deny connections from specific IP addresses. I/O pair connection: This function is used to create a DI to DO pair through the Ethernet. Once the configuration is complete the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background. Modbus protocol The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software. The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI. The Modbus/TCP to the Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability. Portable Configuration All configuration settings can be saved to the EEPROM on the ET6000.. The EEPROM is mounted on a daughter board (called the "portable" board) and the settings can be stored and easily backed up and moved. Ventilated housing designed to operate between -25?øC and +75?øC The ET-6000 is housed in a plastic-based shell /case with a column-like ventilator that helps to cool the working environment inside the shell/case and allows the ET-6000 to operate at temperatures ranging from -25?øC and +75?øC. Web HMI The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point . No HTML or Java skills are needed to create the web pages. Specifications Related Products ET-6052D ET-6052D ET-6060D ET-6060D
Specifications No
Credit Cards Wildcard SSL Certificates