ET-6060D

The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.

The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25C ~ +75C.
Access your ET-6000 module over the internet

• Built in Web Server: Each ET-6000 module has a built - in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser.
  
• Web HMI:The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.
  
• Communication Security:An Account and password is needed when logging into the ET-6000 web server.An IP address filter is included; which can be used to allow or deny connections from specific IP addresses.
  
• Modbus protocol:The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software.
  The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI.
  The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication ability
  
• Built-in Multi-function I/O:An LED indicator is used for each DI or
• DO channel
• All Digital Output modules provide:Power on value (On boot up, the DO status is set to the Power-on value)
  Safe value (If Modbus/TCP communication is lost for a specified period,the DO status is set to the safe value)
  
• All Digital Input modules provide:High/Low latched status.
  DI channels can also be used as DI status and 16-bit low speed (100Hz) counters
  
• All-in-one module:The various I/O components are mixed with multiple channels in a single module
  Provides the most cost effective I/O usage and enhances performance of the I/O operations
  
• 3-way isolated noise/surge protection:Protect the hardware from damage caused by noise and surges
  Designed with isolation circuits for Ethernet, I/O and Power.
  
• Portable Configuration:All configuration settings can be saved to the EEPROM on the ET6000
  EEPROM is mounted on a daughter board (called the "portable" board)
  The settings can stored and easily backed up and moved.
  
• Built-in Dual WatchdogDual Watchdog consists of a Module Watchdog and a Host Watchdog.
  
• Module Watchdog is a built-in hardware circuit: + Can be used to monitor the operation of the module
  + Will reset the CPU module if a failure occurs in either the hardware or the software.
  
• Host Watchdog is a software function:+Can be used to monitor the operating status of the host
  +Is used to prevent network communication problems or host failures
  
• Automatic MDI / MDI-X crossover for plug-and-playRJ-45 port supports automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables.
  
• Ventilated housing designed to operate between -25C and +75CThe ET-6000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case
  Allows the ET-6000 to operate at temperatures ranging from -25C and +75C.
  
• I/O pair connectionThis function is used to create a DI to DO pair through the Ethernet.
  Once the configuration is complete, the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.
  

Specifications:

• ET-660D
  
• CPU: 80186 , 80MHz
  
• SRAM: 512 KB
  
• Flash Memory: 512 KB
  
• EEPROM: 16 KB
  
• Dual Watchdog: Yes
  
• Serial Port: RS-232 (TXD, RXD, GND) (115200 bps Max.)
  
• Ethernet Port: 10 / 100 Base TX (With Link, Activity LED Indicator)
  
• 7 Segment LED Display: 5 Digits
  
• System LED Indicator: 4
  
• Push Button: 4
  
• Digital Output Channels: 8
  
• LED Indicator: Yes
  
• Output Type: Power Relay, Form A (Normal Open)
  
• Operating Voltage Range:
  &nbsp &nbsp 5 ~ 240VAC (47~63Hz)
  &nbsp &nbsp 5 ~ 24VDC
  
• Relay Contact Voltage Range:
  &nbsp &nbsp 0~ 250VAC (47~63Hz)
  &nbsp &nbsp 0~ 28VDC
  
• Max. Load Current: 3.0 A/Channel
  
• Max. Operate Time: 15 ms Max.
  
• Max. Release Time: 3 ms Max.
  
• Insulation Resistance: Min. 1,000 MOhms, at 500VDC
  
• Dielectric Strength Between Open
• Contacts : 750VAC 50/60Hz (at 1 Minute)
  
• Between Coil and Contacts : 4,000VAC 50/60Hz (at 1 Minute)
  
• Surge Strength: 10,000V (at 1.2*50us)
  
• Relay Life: Mechanical :10 million operations at no Load Condition
  
• Electrical : 100, 000, 28VDC@5A min. , Resistive
  
• Digital Input Channels: 10 (Sink/ source)
  
• LED Indicator: Yes
  
• Input Type: Isolation, Two Common for All Digital Inputs
  
• On Voltage Level: +10V ~ 50V
  
• Off Voltage Level: +3V max
  
• Input Impedance: 10K Ohms, 0.66W
  
• Counters Channels : 10
  
• Max. Input Frequency : 100Hz
  
• Min. Pulse Width: 5ms
  
• Intra-module Isolation, Field to Logic 3750V rms
  
• 3 Way Isolation - Ethernet: 1500V rms
  
• 3 Way Isolation - I/O: 3750V rms
  
• 3 Way Isolation - Power: 1000 VDC
  
• Din Rail Mount: Yes
  
• Wall Mount: Yes
  
• Power Input: +10 to +30 VDC
  
• Power Consumption: 4.8W
  
• Operating Temperature: -25C ~ +75C
  
• Storage Temperature: -30C ~ +75C
  
• Relative Humidity: 10% to 95% Non-condensing
  
• Certification: CE, FCC
  
• Dimensions: 90mm x 111mm x 70mm (W x D x H)