ET-6052D

The ET-6000 series also supports various Modbus functions. For example, Modbus/TCP slave, Modbus/TCP to Modbus/RTU gateway, Modbus/RTU master, Modbus/RTU slave; meaning the ET-6000 series can easily be integrated into any SCADA software environment using the Modbus protocol.

The ET-6000 series modules are designed to be used in Industrial monitoring and measurement applications. The hardware has been manufactured to survive in harsh and noisy environments. The module contains 3-way isolation against noise and surge signals, has a wide range of power input (+10 ~ +30VDC) and can operating at temperature ranging from -25C ~ +75C.
Access your ET-6000 module over the internet

• Built in Web Server
  Each ET-6000 module has a built - in web server that allows the users to easily configure, monitor and control the module from a remote location using a regular web browser



• Web HMI
  The Web HMI function allows users to create attractive, dynamic web pages to monitor and control the I/O points. Users can upload specific I/O layout pictures (bmp, jpg, gif formats) and define a description for each I/O point. No HTML or Java skills are needed to create the web pages.



• Communication Security
  An Account and password is needed when logging into the ET-6000 web server.
  An IP address filter is included; which can be used to allow or deny connections from specific IP addresses



• Modbus protocol
  The Modbus/TCP slave function on the Ethernet port can be used to provide data to remote SCADA software.
  The Modbus/RTU slave function on the RS-232 port can be used to connect to a local HMI.
  The Modbus /TCP to Modbus/RTU gateway function through the Ethernet port to the RS-232 port can be used to upgrade a serial device with Ethernet communication abilit.



• Built-in Multi-function I/O
  An LED indicator is used for each DI or DO channel
  All Digital Output modules provide :
  Power on value (On boot up, the DO status is set to the Power-on value)
  Safe value (If Modbus/TCP communication is lost for a specified period,the DO status is set to the safe value)
  All Digital Input modules provide :
  High/Low latched status
  DI channels can also be used as DI status and 16-bit low speed (100Hz) counters.



• All-in-one module
  The various I/O components are mixed with multiple channels in a single module
  Provides the most cost effective I/O usage and enhances performance of the I/O operations


• 3-way isolated noise/surge protection
  Protect the hardware from damage caused by noise and surges
  Designed with isolation circuits for Ethernet, I/O and Power


• Portable Configuration
  All configuration settings can be saved to the EEPROM on the ET6000
  EEPROM is mounted on a daughter board (called the “portable* board)
  The settings can stored and easily backed up and moved.


• Built-in Dual Watchdog
  Dual Watchdog consists of a Module Watchdog and a Host Watchdog.
  Module Watchdog is a built-in hardware circuit
  Can be used to monitor the operation of the module
  Will reset the CPU module if a failure occurs in either the hardware or the software.
  Host Watchdog is a software function
  Can be used to monitor the operating status of the host
  Is used to prevent network communication problems or host failures


• Automatic MDI / MDI-X crossover for plug-and-play
  RJ-45 port supports automatic MDI/MDI-x that can automatically detect the type of connection to the Ethernet device without requiring special straight or crossover cables


• Ventilated housing designed to operate between -25°C and +75°C
  The ET-6000 is housed in a plastic-based shell/case with a column-like ventilator that helps to cool the working environment inside the shell/case
  Allows the ET-6000 to operate at temperatures ranging from -25°C and +75°C.


• I/O pair connection
  This function is used to create a DI to DO pair through the Ethernet.
  Once the configuration is complete, the ET-6000 module can poll the status of local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background

Specifications:

• CPU: 80186 , 80MHz
  


• SRAM: 512 KB
  


• Flash Memory: 512 KB


• EEPROM: 16 KB
  


• Dual Watchdog: Yes


• Serial Port: RS-232 (TXD, RXD, GND) (115200 bps Max.)
  


• Ethernet Port: 10 / 100 Base TX (With Link, Activity LED Indicator)
  


• 7 Segment LED Display: 5 Digits
  


• System LED Indicator: 4
  


• Push Button: 4
  


• Output Channels: 8 (Source)
  


• LED Indicator: Yes
  


• Output Type: Isolated (N-MOSFET, Open Source)
  


• Max Load Current: 1.4A/ channel
  


• Load Operating Voltage: 10VDC to 40VDC
  


• External Power Voltage Range: 12VDC to 45VDC
  


• Over-Voltage Protection: +48 VDC
  


• Direct Drive Power Relay Module: Yes
  


• Short Circuit Protection and Current Limitation: Yes
  


• Switching Inductive Loads: Yes
  


• Intra-module Isolation, Field to Logic: 3750V rms
  


• Input Channels: 14 (Sink/Source)
  


• LED Indicator: Yes
  


• Input Type: Isolation, One Common/Ground for All Digital Inputs
  


• Input Impedance: 10K Ohms, 0.5W (For Wet Contact)
  


• Dry Contact (Source):
  On Voltage Level : Close to GND
  Off Voltage Level : Open
  


• Wet Contact (Sink/Source):
  On Voltage Level : +10 to 50Vdc
  Off Voltage Level : +3V (Max.)


• Each Channel Can Be To Dry Contact or Wet


• Contact: Yes
  


• Counters Channels : 14
  


• Max. Input Frequency : 100Hz
  


• Min. Pulse Width : 5ms
  


• Intra-module Isolation, Field to Logic: 3750V rms
  


• 3 Way Isolation - Ethernet: 1500V rms
  


• 3 Way Isolation - I/O: 3750V rms
  


• 3 Way Isolation - Power: 1000 VDC
  


• Din Rail Mount: Yes
  


• Wall Mount: Yes
  


• Power Input: +10 to +30 VDC
  


• Power Consumption: 3.0W
  


• Operating Temperature: -25°C ~ +75°C
  


• Storage Temperature: -30°C ~ +75°C
  


• Relative Humidity: 10% to 95% Non-condensing
  


• Certifications: CE, FCC
  


• Dimensions: 90mm x 111mm x 70mm (W x D x H)